Argus
Stereo Camera System |
 |
 |
-
Easy To Use
-
Low Cost System
-
Low Cost 3-D Prints
-
No Mounting Necessary
-
The 3-D prints can be made by any
lab
|
Have you ever considered the idea of making
old-fashioned side-by-side 3-D prints, but thought it was just too much
trouble? Then here's a new 3-D camera just for you! It uses ordinary processing
and printing, and you get a ready-to-view 3-D print returned from any
photo lab of your choice (drug store, one hour lab, anywhere!) that
may be viewed in the ARGUS stereo viewer (or "free viewed" without a viewer
- if you know how).
The new ARGUS STEREO CAMERA
is a compact (5 ¾" x 3" x 2" - it fits into a large pocket), lightweight
(10 oz. with 2 "AA" batteries) camera with 2 lenses and a built-in mirror
system to increase the stereo base to a "normal" separation. The twin
28mm fixed focus lenses are sharp from 2.5 feet to infinity (on Daylight
setting) - which is great for stunning 3-D portraits, flowers, animals
or whatever! |
|
There's nothing to set because the camera
has just two apertures (daylight/f18 & flash/f11) and one shutter speed
(1/100). Our tests, however show that the wide latitude of negative film,
along with the computerized color printing used in labs today, make for
beautifully exposed prints in normal daylight. When it is too dark to
get a good exposure, a red light reminds you to turn on the built-in pop-up
reflector flash.
The camera is designed to be used with
normal 35mm ISO 200 negative film (ISO 400 optional with flash) to get
a side-by-side 3-D print pair within the normal 35mm film frame. When the
film is sent to any lab OF YOUR CHOICE no special instructions are needed.
Just ask for the normal 3 ½" x 5" or 4" x 6" prints,
matte or glossy.
No mounting is required because when you get your prints back you
will have a properly aligned right and left image on each print (in just
60 minutes with a one hour lab!). Just put the prints into the companion
ARGUS STEREO PRINT VIEWER that comes with the camera, and you'll see
your pictures in 3-D! The print viewer features very large plastic prismatic
lenses, and is designed so that no focusing or interocular adjustment is
needed. A clip holds the standard size prints firmly in place. It couldn't
be simpler!
The complete outfit consists of the
ARGUS Stereo Camera, ARGUS Stereo Print Viewer, soft camera pouch, invaluable
lens shade, 2 sample prints and instructions.
No. 8027 ...
$84.95 (3.6 lbs.) (Batteries Not Included)
Sample
Print $1.00
New Loreo/Argus Mini Stereo Print
Viewer now available!!! See Stock No.
2027 for details!!!
Order by phone at
(310) 837-2368, or by fax at (310) 558-1653
or write to:
Reel 3-D Enterprises,
Inc.
P.O. Box 2368
Culver City, CA 90231
United States of America
E-Mail: Reel3D@aol.com
Last modified:
November 23rd, 1999
Copyright ©
1998/99 by Stereoscopy.com and Alexander
Klein. All rights reserved.